COMPANY OVERVIEW

• Promote and comply with all Company and safety policies and procedures
• Set up hoisting equipment for raising and placing structural-steel members
• Fasten steel members to cable of hoist using chain, cable or rope
• Signal worker operating hoisting equipment to lift and place steel member
• Guide member using tab line (rope) or ride on member in order to guide it into position
• Pull, push or pry steel members into approximate position while member is supported by hoisting device
• Force members into final position using turnbuckles, crowbars, jacks and hand tools
• Align holes in member with corresponding holes in previously placed member by drifting drift pins or handle of wrench through holes
• Verify vertical and horizontal alignment of members, using plumb bob and level
• Bolt aligned members to keep them in position until they can be permanently bolted or welded in place
• Cut and weld steel members to make alterations, using oxyacetylene welding equipment
• May be required to travel to different jobsites on limited notice
• Maintain a professional appearance
• Other duties as assigned by Foreman or Superintendent

• 4+ years related experience and/or training or equivalent combination of education and experience
• NCCER Certification/License (preferred)
• Minimum 4 years of experience in Ironworker role

• Be knowledgeable of MIC Health and Safety programs and project specific regulations.
• When on-site, actively participate in daily toolbox meetings with crews and subcontractors.
• Set a personal example of safe behavior.
• Read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals
• Add and subtract two-digit numbers, multiply and divide with 10's and 100's and ability to perform these operations using units weight measurement and volume
• Common sense understanding to carry out instructions furnished in written or oral form
• Ability to work within precise standards of accuracy and follow set procedures and standards
• Other may duties may be assigned

• Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions.
• May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks.
• Stamina to perform this task repetitively and continuously for several hour intervals.
• Uncontrolled environmental conditions: Constant change in weather and site conditions.
• This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises.
• Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.).
• Move in and around confined, cluttered, and uneven areas.
• May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights.
• Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings.
• Visualize objects in three dimensions from drawings.
• Keep good balance and work at heights.
• See well (either naturally or with correction).
• Hear well (either naturally or with correction.)
• Coordinate the use of eyes, hands, and feet.