BIM Drafter/Spooler Job at SPC Mechanical Corporation
Job Summary:
In support of Lead Coordinator, provide construction planning and costs and establish layout and fabrication drawings. Under guidance of Lead Coordinator, ensures compliance with standards, codes, specifications, and SOPs. Knowledge of BIM related platforms such as Revit, Susque, Navis, Victaulic Tools, Microsoft Excel, Outlook, and Go to meeting Software.
Qualification Requirements:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications:
o Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience.
Knowledge, Skills, and Abilities:
o Ability to demonstrates high level of MEP system knowledge, construction techniques and special awareness.
o Knowledgeable of AutoCAD Design software.
o Ability to read and interpret documents.
o Ability to write routine reports and correspondence.
o Ability to speak effectively before groups of customers or employees of organization.
o Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardizations exits.
o Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
o Ability to work with mathematical concepts such as probability a statistical inference, and fundamental of plane and solid geometry and trigonometry.
o Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Supervisory Responsibilities: None
Essential Functions: include the following. Other duties may be assigned.
o Spooling, Labeling, Dimensioning, Documentation, Printing Spool Books, Printing Drawings, Compliance with Standards, Compliance with Naming Conventions, Placing Hangers, Running reports on Hangers, Running Reports on Materials, and Placing of Trimble points.
o Attend meetings with PM/FS/LC.
o Provide assistance in creating, updating and maintaining libraries of equipment, fittings for BIM system.
o Properly files all drawings, BOMs, and cut sheets.
o Provide detailed shop drawings as required of duct and piping for complete project, with in time frames provided by project manager or department manager.
o Provide piping and hanger assembly drawings for Pipe Fab Shop, Sheet Metal Shop and/or Prefabrication Shops.
o Learn all necessary information regarding mechanical and plumbing installations that will apply to MEP systems.
o Utilizes knowledge of various machines, engineering practices, mathematics, building materials, and other physical sciences to complete drawings.
o Makes any adjustments or changes necessary or desired.
o Draws finished designs from sketches.
o Uses computer assisted drafting and design (CADD) equipment and software ? Revit, Navis, Sysque, Vic Tools, Excel, Go to Meeting Software, and email.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms and talk or hear. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 50 pounds.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to moving mechanical parts and high, precarious places.
Competencies:
To perform the job successfully, an individual should demonstrate the following competencies:
Analytical - Uses intuition and experience to complement data, Designs workflows and procedures.
Design - Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Demonstrates attention to detail.
Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities.
Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.
Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things.
Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings.
Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information.
Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.
Visionary Leadership - Displays passion and optimism; Inspires respect and trust; Mobilizes others to fulfill the vision; Provides vision and inspiration to peers and subordinates.
Change Management - Develops workable implementation plans; Communicates changes effectively; Builds commitment and overcomes resistance; Prepares and supports those affected by change; Monitors transition and evaluates results.
Delegation - Delegates work assignments; Matches the responsibility to the person; Gives authority to work independently; Sets expectations and monitors delegated activities; Provides recognition for results.
Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others.
Managing People - Includes staff in planning, decision-making, facilitating and process improvement; Takes responsibility for subordinates' activities; Makes self-available to staff; Provides regular performance feedback; Develops subordinates' skills and encourages growth; Solicits and applies customer feedback (internal and external); Fosters quality focus in others; Improves processes, products and services.; Continually works to improve supervisory skills.
Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.
Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.
Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.
Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment.
Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities.
Strategic Thinking - Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Identifies external threats and opportunities; Adapts strategy to changing conditions.
Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.
Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals.
Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.
Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.
Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.
Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time.
Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed.
Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention.
Please Note :
blog.nvalabs.org is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, blog.nvalabs.org provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, Site.com is the ideal place to find your next job.
In support of Lead Coordinator, provide construction planning and costs and establish layout and fabrication drawings. Under guidance of Lead Coordinator, ensures compliance with standards, codes, specifications, and SOPs. Knowledge of BIM related platforms such as Revit, Susque, Navis, Victaulic Tools, Microsoft Excel, Outlook, and Go to meeting Software.
Qualification Requirements:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Minimum Qualifications:
o Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience.
Knowledge, Skills, and Abilities:
o Ability to demonstrates high level of MEP system knowledge, construction techniques and special awareness.
o Knowledgeable of AutoCAD Design software.
o Ability to read and interpret documents.
o Ability to write routine reports and correspondence.
o Ability to speak effectively before groups of customers or employees of organization.
o Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardizations exits.
o Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
o Ability to work with mathematical concepts such as probability a statistical inference, and fundamental of plane and solid geometry and trigonometry.
o Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Supervisory Responsibilities: None
Essential Functions: include the following. Other duties may be assigned.
o Spooling, Labeling, Dimensioning, Documentation, Printing Spool Books, Printing Drawings, Compliance with Standards, Compliance with Naming Conventions, Placing Hangers, Running reports on Hangers, Running Reports on Materials, and Placing of Trimble points.
o Attend meetings with PM/FS/LC.
o Provide assistance in creating, updating and maintaining libraries of equipment, fittings for BIM system.
o Properly files all drawings, BOMs, and cut sheets.
o Provide detailed shop drawings as required of duct and piping for complete project, with in time frames provided by project manager or department manager.
o Provide piping and hanger assembly drawings for Pipe Fab Shop, Sheet Metal Shop and/or Prefabrication Shops.
o Learn all necessary information regarding mechanical and plumbing installations that will apply to MEP systems.
o Utilizes knowledge of various machines, engineering practices, mathematics, building materials, and other physical sciences to complete drawings.
o Makes any adjustments or changes necessary or desired.
o Draws finished designs from sketches.
o Uses computer assisted drafting and design (CADD) equipment and software ? Revit, Navis, Sysque, Vic Tools, Excel, Go to Meeting Software, and email.
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel. The employee is frequently required to reach with hands and arms and talk or hear. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 50 pounds.
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to moving mechanical parts and high, precarious places.
Competencies:
To perform the job successfully, an individual should demonstrate the following competencies:
Analytical - Uses intuition and experience to complement data, Designs workflows and procedures.
Design - Generates creative solutions; Translates concepts and information into images; Uses feedback to modify designs; Demonstrates attention to detail.
Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics.
Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities.
Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.
Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs; Solicits customer feedback to improve service; Responds to requests for service and assistance; Meets commitments.
Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things.
Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings.
Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information.
Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed.
Visionary Leadership - Displays passion and optimism; Inspires respect and trust; Mobilizes others to fulfill the vision; Provides vision and inspiration to peers and subordinates.
Change Management - Develops workable implementation plans; Communicates changes effectively; Builds commitment and overcomes resistance; Prepares and supports those affected by change; Monitors transition and evaluates results.
Delegation - Delegates work assignments; Matches the responsibility to the person; Gives authority to work independently; Sets expectations and monitors delegated activities; Provides recognition for results.
Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others.
Managing People - Includes staff in planning, decision-making, facilitating and process improvement; Takes responsibility for subordinates' activities; Makes self-available to staff; Provides regular performance feedback; Develops subordinates' skills and encourages growth; Solicits and applies customer feedback (internal and external); Fosters quality focus in others; Improves processes, products and services.; Continually works to improve supervisory skills.
Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness.
Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.
Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.
Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment.
Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.
Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities.
Strategic Thinking - Develops strategies to achieve organizational goals; Understands organization's strengths & weaknesses; Identifies external threats and opportunities; Adapts strategy to changing conditions.
Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions.
Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals.
Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans.
Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.
Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.
Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time.
Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan.
Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed.
Innovation - Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas; Presents ideas and information in a manner that gets others' attention.
Please Note :
blog.nvalabs.org is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, blog.nvalabs.org provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, Site.com is the ideal place to find your next job.